Surface Area of a Cone Calculator

Published on: November 19, 2026
Final Answer: Free | Full Steps: Plus

This Surface Area of a Cone Calculator finds the total area of the outside of a cone from its radius and its height, and shows the working line by line. The surface is the circular base and the curved side. The curved side needs the slant height, which is found first with Pythagoras' theorem from the radius and the height. The answer is given exactly in terms of π and then as a decimal, in square units.

h r l

In the diagram, the radius of the base is \(r\), the height is \(h\) and the slant height down the side is \(l\).

Step-by-step method

  1. Set up the problem.
  2. Write the surface area formula.
  3. Write Pythagoras' theorem for the slant height l.
  4. Substitute the radius and the height into Pythagoras' theorem.
  5. Work out the slant height l.
  6. Substitute the radius and the slant height into the surface area formula.
  7. Work out the surface area.

Formula: Surface Area of a Cone

This formula adds the circular base, πr², and the curved side, πrl, where l is the slant height.

\(SA = \pi r^{2} + \pi rl\)

Formula: Pythagoras' Theorem

This formula gives the slant height l from the radius r and the height h. Square them, add them, then take the square root.

\(l = \sqrt{r^{2} + h^{2}}\)

Required knowledge

The worked examples below go through the same pattern from start to finish, so you can compare every step with your own working. For more practice, the notes page goes further with extra worked examples and fuller explanations of the ideas behind each step. Use them together to check your answers and to understand why each step works.

See Example 1 Hide Example 1

Problem

\(r = 3, h = 4\)

Approach

Step-by-step method

  1. Set up the problem.
  2. Write the surface area formula.
  3. Write Pythagoras' theorem for the slant height l.
  4. Substitute the radius and the height into Pythagoras' theorem.
  5. Work out the slant height l.
  6. Substitute the radius and the slant height into the surface area formula.
  7. Work out the surface area.

Formula

Formula: Surface Area of a Cone

This formula adds the circular base, πr², and the curved side, πrl, where l is the slant height.

\(SA = \pi r^{2} + \pi rl\)

Formula: Pythagoras' Theorem

This formula gives the slant height l from the radius r and the height h. Square them, add them, then take the square root.

\(l = \sqrt{r^{2} + h^{2}}\)

Step 1

Step 1 - Set up the problem.

In this problem: We are finding the surface area of a cone whose radius is \(r = 3\) and whose height is \(h = 4\). The height is measured straight up from the centre of the base to the tip.

\(r = 3,\; h = 4\)
4 3 l

Step 2

Step 2 - Write the surface area formula.

In this problem: The surface of a cone is the circular base, with area \(\pi r^{2}\), and the curved side, with area \(\pi rl\), where \(l\) is the slant height from the tip down the side to the edge of the base. \(l\) is not given, so it is worked out first.

\(SA = \pi r^{2} + \pi rl\)

Step 3

Step 3 - Write Pythagoras' theorem for the slant height l.

In this problem: The radius, the height and the slant height make a right triangle inside the cone with \(l\) as its longest side, so Pythagoras' theorem gives it.

\(l = \sqrt{r^{2} + h^{2}}\)

Step 4

Step 4 - Substitute the radius and the height into Pythagoras' theorem.

In this problem: Replacing \(r\) with \(3\) and \(h\) with \(4\) in \(l = \sqrt{r^{2} + h^{2}}\) gives \(l = \sqrt{3^{2} + 4^{2}}\).

\(l = \sqrt{3^{2} + 4^{2}}\)

Step 5

Step 5 - Work out the slant height l.

In this problem: \(3^{2} = 9\) and \(4^{2} = 16\), then \(9 + 16 = 25\), and \(\sqrt{25} = 5\).

\(\begin{aligned} l &= \sqrt{3^{2} + 4^{2}} \\ &= \sqrt{9 + 16} \\ &= \sqrt{25} \\ &= 5 \end{aligned}\)

Step 6

Step 6 - Substitute the radius and the slant height into the surface area formula.

In this problem: Replacing \(r\) with \(3\) and \(l\) with \(5\) in \(SA = \pi r^{2} + \pi rl\) gives \(SA = \pi \times 3^{2} + \pi \times 3 \times 5\).

\(SA = \pi \times 3^{2} + \pi \times 3 \times 5\)

Step 7

Step 7 - Work out the surface area.

In this problem: Squaring the radius gives \(3^{2} = 9\), and the radius times the slant height is \(3 \times 5 = 15\). So the base is \(9\pi\) and the side is \(15\pi\). Adding them gives \(24\pi\), and \(24\pi \approx 75.4\).

\(\begin{aligned} SA &= \pi \times 3^{2} + \pi \times 3 \times 5 \\ &= \pi \times 9 + \pi \times 15 \\ &= 9\pi + 15\pi \\ &= 24\pi \\ &\approx 75.4 \end{aligned}\)

Final Answer

\(SA = 24\pi \approx 75.4\)
See Example 2 Hide Example 2

Problem

\(r = 5, h = 7\)

Approach

Step-by-step method

  1. Set up the problem.
  2. Write the surface area formula.
  3. Write Pythagoras' theorem for the slant height l.
  4. Substitute the radius and the height into Pythagoras' theorem.
  5. Work out the slant height l.
  6. Substitute the radius and the slant height into the surface area formula.
  7. Work out the surface area.

Formula

Formula: Surface Area of a Cone

This formula adds the circular base, πr², and the curved side, πrl, where l is the slant height.

\(SA = \pi r^{2} + \pi rl\)

Formula: Pythagoras' Theorem

This formula gives the slant height l from the radius r and the height h. Square them, add them, then take the square root.

\(l = \sqrt{r^{2} + h^{2}}\)

Step 1

Step 1 - Set up the problem.

In this problem: We are finding the surface area of a cone whose radius is \(r = 5\) and whose height is \(h = 7\). The height is measured straight up from the centre of the base to the tip.

\(r = 5,\; h = 7\)
7 5 l

Step 2

Step 2 - Write the surface area formula.

In this problem: The surface of a cone is the circular base, with area \(\pi r^{2}\), and the curved side, with area \(\pi rl\), where \(l\) is the slant height from the tip down the side to the edge of the base. \(l\) is not given, so it is worked out first.

\(SA = \pi r^{2} + \pi rl\)

Step 3

Step 3 - Write Pythagoras' theorem for the slant height l.

In this problem: The radius, the height and the slant height make a right triangle inside the cone with \(l\) as its longest side, so Pythagoras' theorem gives it.

\(l = \sqrt{r^{2} + h^{2}}\)

Step 4

Step 4 - Substitute the radius and the height into Pythagoras' theorem.

In this problem: Replacing \(r\) with \(5\) and \(h\) with \(7\) in \(l = \sqrt{r^{2} + h^{2}}\) gives \(l = \sqrt{5^{2} + 7^{2}}\).

\(l = \sqrt{5^{2} + 7^{2}}\)

Step 5

Step 5 - Work out the slant height l.

In this problem: \(5^{2} = 25\) and \(7^{2} = 49\), then \(25 + 49 = 74\), and \(\sqrt{74} \approx 8.6\).

\(\begin{aligned} l &= \sqrt{5^{2} + 7^{2}} \\ &= \sqrt{25 + 49} \\ &= \sqrt{74} \\ &\approx 8.6 \end{aligned}\)

Step 6

Step 6 - Substitute the radius and the slant height into the surface area formula.

In this problem: Replacing \(r\) with \(5\) and \(l\) with \(8.6\) in \(SA = \pi r^{2} + \pi rl\) gives \(SA = \pi \times 5^{2} + \pi \times 5 \times 8.6\).

\(SA = \pi \times 5^{2} + \pi \times 5 \times 8.6\)

Step 7

Step 7 - Work out the surface area.

In this problem: Squaring the radius gives \(5^{2} = 25\), and the radius times the slant height is \(5 \times 8.6 = 43\). So the base is \(25\pi\) and the side is \(43\pi\). Adding them gives \(68\pi\), and \(68\pi \approx 213.63\).

\(\begin{aligned} SA &= \pi \times 5^{2} + \pi \times 5 \times 8.6 \\ &= \pi \times 25 + \pi \times 43 \\ &= 25\pi + 43\pi \\ &= 68\pi \\ &\approx 213.63 \end{aligned}\)

Final Answer

\(SA = 68\pi \approx 213.63\)
h r l

Example Problems

Click one to load it into the box and solve it.